Snap On Automotive Tester

PRICE REDUCED. Also feel free to make offer.
LIKE NEW, used only once or twice. Comes in hard plastic carry case! Reatials at $399.00

Description:
EEDM586DK Automatic Automotive DMM Includes:
500mA, Ceramic UL Fuse (EEDM504B1)
10 Amp Ceramic, UL Fuse (EEDM504B2)
Test Lead Set with Alligator Clips (EEDM504B3)
Temperature Input Adaptor (MT586-4)
Temperature Probe (MT586-14)
Inductive Pick-up (EEDM512B1)
Rubber Boot (EEDM504D1)
Hard Carrying Case (MT586BK1)
Instruction Manual (ZEEDM586D)
(1) 9 Volt Alkaline Battery Installed.

Optional Accessories (Not Included)
0-400 AC/DC Amp Clamp-on Accessory (EETA501B)
0-1,000 AC/DC Amp Clamp-on Accessory (EETA502B)
10mA 60 Amp Low Current Clamp (MT10100)
30 Amp Adaptor (MT5030)
0 - 500PSI Pressure Adaptor (MT5810)
Diesel RPM Adapter (MTRPMD)
Boot Hook Hanger for Rubber Boot (EEDM503B1)
Soft Carrying Case (MT596AK1)
Deluxe Test Lead Set and Adaptors (MTTL700)

General Specifications
Max. Voltage between any Input and Ground: 1000V
Fuse Protection mA: 0.5Amp/600VAC
Fuse Protection: A: 10Amp/600VAC
Display Type Digital: 20,000 count, 4x per second update
Display Type Analog: 2 x 41 segments, 20x per second update
Operating Temperature: 0° to 40°C (32° to 104°F)
Storage Temperature: -10° to 50°C (14° to 122°F)
Relative Humidity (0% to 80%): 0° to 35°C (32° to 95°F)
Relative Humidity (0% to 70%): 35° to 55°C (95° to 131°F)
Temperature Coefficient: 0.1 x (Specified Accuracy) per °C for temperature 28°C
Power Supply: (1) each 9 volt alkaline battery (pre-installed)
Battery Life: 100 hrs. Typical
Size (H x L x W): 2.4" x 3.8" x 8.0" (61mm x 97mm x 203mm)
Weight: 24 oz. (680g)
Features:
• LCD Display - 20000 count with 42 segment bar graph.
• REC (Record Mode) - Store minimum, maximum, and average readings over a measurement period.
• RANGE - Manually select the appropriate range.
• AC/DC - Manually select AC or DC measurement function.
• FUNCTION - Toggle between functions on Ohm, TEMP, and IG modes.
• Hz (Frequency) - Measure the frequency of sensors and signals.
• OHMS/RESISTANCE - Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring.
• High Resolution DCmV Range - Additional 40 millivolt range with 0.01mV resolution for improved accuracy when performing low voltage measurements.
• DCV, ACV (DC Volts, AC Volts) - Measure the voltage of circuits and sensors. Measure the voltage of ABS wheel sensors.
• REL (Relative Mode) - Factor out lead resistance for improved low ohm measurements or compare readings to a known standard. Can also be used for differential measurements.
• CYL (Cylinder) - Selects the number of cylinders in IG mode.
• HOLD - Lock the reading on the display for hard to read locations for future reference.
• PEAK-H (Peak Hold) - Capture signals spikes as fast as 1mS to diagnose intermittent events.
• TEMP (Temperature) - Measure temperature with included temperature probe.
• AC/DC Current Functions - Measure the parasitic draw from the battery with ignition off.
• IP, IG (Automotive Functions) - Measure RPM, Duty, Dwell, mS pulse width, Frequency.
• TILT STAND - Is built-in into the instrument housing