Industrial Electrician DVD Training Course

Industrial Electrician DVD Training Course, Micrologix 1000 Programmable Logic Controller

Please check my feedback on Ebay
under expert_tutor on this item.

Become A Professional Industrial Electrician.These fascinating DVD/CD Courses introduces you to PLC, Relay Ladder, Pneumatic, Motor Controls and Industrial Electrical Systems..The Most Complete DVD/CD-Based Training course offered. Learn all you need to know to work with Industrial control systems. Interactive Labs, 3-D simulations, quizzes, tests and animation's presented in these courses bring unmatched interactivity and give you a comprehensive view of Industrial Controls systems.
From the apprentice level to seasoned Industrial Electrician this training has been used as full training courses.

Also in these interactive narrated video DVD/CD courses you'll study everything you need to know about Industrial Electrical System, MicroLogix™ PLC, Advanced Allen-Bradley,GE AND other PLC brands.

With Step-by-step real world examples.

A total of (50) CD/DVD's . Hours and Hours of training.

The course comes Complete with:

- Allen-Bradley MicroLogix 1000 1761-L16AWA,
(10) 120VAC INPUTS, (6) RELAY OUTPUTS A/B List Price $380.00
120/240Vac Supply (Brand New in the Box)

- Micrologix Programmming Cable $62.00

- Motor Contols DVD training Course (6 DVD) $480.00

- Basic Electrician training Course (10 DVD) $699.00

- Industrial Master Electrician training Course (12 DVD) $699.00

- 2005 National Electrical Code training Course (4 DVD) $549.00

- MicroLogix™ DVD training Course (2 DVD) $300.00

- PanelView DVD training Course (1 DVD) $199.00
- Basic and Advanced PLC DVD training Course (8 DVD) $1295.00

- Basic Pneumatic CD Training Course (1 DVD) $199.00

- Basic Electrical CD Training Course (1 CD) $199.00

- Basic Hydraulic CD Training Course (1 CD) $199.00

- Basic Mechanical CD Training Course (1 CD) $199.00

- Relay Training DVD training Course (1 DVD) $199.00

- Micrologix Installation and Instructions Manual

Total List Price value at: Over $3000.00

JUST THE ADDED HARDWARE ALONE IS WORTH THE MONEY

So Learn all you need to Know to create Industrial Control systems. In this Crash Course You'll study the theory and operation of Basic and Advanced Electrical , PLC, Relay Ladder Circuits , Pneumatic, and Motor Controls. You will also learn how to design and Troubleshoot Industrial Control systems and interface then to the real world.

A cost-effective way to learn the latest cutting edge technology in a home study program environment.

Course Objectives:

Basic Electrician DVD Training Course

E-1 Electron Theory
E-2 Ohm's Law
E-3 Magnetism
E-4 Safety & Tools
E-5 Residential Wiring Method
E-6 Commercial Wiring Method
Conduit Bending Program
E-7 The Service
E-8 Grounding
E-9 Motors-Box and Conduit-Fill
E-10 Inspection-Maintenance and Meters

Master Electrician DVD Training Course

- "Ohms Law & Theory"

This DVD makes Ohms law easy to understand. It explains the symbol letters, covers series circuits, parallel and series-parallel circuits, inductive and
capacitive reactance, impedance, harmonics, neutral, etc.

- "Voltage Drop - Resistance"

This DVD will take you through the Code requirements and resistance tables
for voltage drop. How to use the formulas and solve the "exact K" factor.
Understanding these calculations is a very important part of the exam.

- "Ampacity Correction Factors"

This DVD takes the electrician on a walk through the ampacity tables to learn the correct method for sizing conductors. This is the most violated calculation
in everyday wire sizing. All of the notes, correction factors, note 8 derating,the Ý, etc. are explained on this video.The correct use of THHN wire on 60° or
75°C rated terminations.

- "Motors"

This DVD will take you through the steps of motor calculations from the F.L.C. to the sizing of the feeder overcurrent device.Explains the next higher standard size fuse or breaker, largest motor, single-phase motors on a three-phase system, overloads, wound-rotor, service factors, etc.

- "Cooking Equipment Demand Factors"

This DVD will cover the hard to understand tables on household and commercial cooking equipment demand factors. The notes are fully explained. The video covers the sizing of the neutral, 1 ø ranges on a 3 ø system, home economics classroom demand, etc.

- "Dwelling-Residential Service Sizing"

This DVD starts at the minimum size 60 amps and works up from there! You must understand the code rules for a dwelling if you want to pass an exam! The video covers the sizing of the grounding electrode conductor, neutral sizing, etc.

- "Box and Conduit Sizing"

This DVD takes you on a walk explaining the Code Tables 370-16a & b, Tables 4 and 5 and the Brand New Appendix C with 82 New pages on conduit fill! The video covers the confusing with or without a cover for selecting the correct area of square inch.

- "Single-Phase Transformers"

This DVD explains the theory involved, ratios, volt-amps, efficiency,power factor, input, output, skin effect, eddy current, phase, balancing loads,
neutral calculations, etc.

- "Three-Phase Transformers"

This DVD makes the very troublesome exam calculation very easy to understand for the electrician. A simple to follow format designed to answer the delta-wye questions. The video covers phase amps, line amps, efficiency, kva,delta high-leg, open-delta, balancing, etc.

- "Commercial-Multifamily Service Sizing"

This DVD walks you through the step by step format to determine the minimum size service to a school, restaurant, motel, apartment, etc. The video covers the receptacle demand, multioutlet assemblies, show window demands, sign requirements, etc.

- "Motor Control-Switch Connections"

This DVD explains schematics, interlocks, sequence, relays, motor starters,
contactors, 3-way and 4-way switch connections, etc.

- "The Exam"

This DVD explains in great detail how to prepare for an electrical exam.
It will test the electricians knowledge on the closed book part of the exam dealing with theory, definitions, burial depths, etc. This video also tests
ones knowledge in the open book part of the exam explaining the careful
reading of key words.

Master Electrician DVD Series
Includes all 12 DVD .....Retail for $699.00

MicroLogix™ PLC DVD Training Course (2 DVD)

To learn MicroLogix™ PLC interface design, RSLogix™ 500
A industry standard ladder logic programming language in a
easy to understand format to program a typical MicroLogix™
PLC and interface it to the outside world.

-RSLogix™ 500 software addressing notations
-The basics of ladder programming
-How to program input devices
-The controller's memory system,I/O interface configurations
and wiring requirements
-How to go from relay logic to the MicroLogix™ controller's logic
-Programming Timing, counting,and data-handling instructions
-How to apply specific programming techniques to RSLogix™ 500
-How to use flow control instructions to increase program speed
-Identify the MicroLogix™ specific code instruction.
-Describe the internal register structure of the MicroLogix™ PLC.
-Explain the procedures for using the comparison and flow control instructions.
-Trace the data flow that takes place between I/O circuits during program execution.
-Interpret a standard Relay logic program and convert it to RSLogix™ 500.
-Interfacing Input/Output and Timer Devices
-Serial Input/Output communications
-MicroLogix™family Architecture and Addressing Modes.
-And much more...

Advanced PLC DVD Training Course (8 DVD)

A comprehensive PLC program applicable to all makes and models of PLCs without requiring any prior PLC knowledge. The program starts off with the basics, thoroughly explains the hardware section of the controller, moves on to both basic and advanced programming topics.

1,2,3 modules: Introduction to Programmable Controllers (27:55 min), Number Systems and Codes - their uses and applications in PLCs (25:15 min), and Logic Functions and How They Relate to PLC Systems (20:56 min)

4,5,6 modules: General CPU Operations, Memory System, and PLC I/O Addressing (47:20 min), Discrete Input/Output Systems (45:15 min), and Analog Input/Output Systems (49:32 min)

7,8,9 modules: PLC Instructions and Control Software Programming - Part 1 (49:59 min), PLC Instructions and Control Software Programming - Part 2 (42:33 min), and PLC Instructions and Control Software Programming - Part 3 (43:40 min)

10 module: PLC Control System Implementation and Programming (51:20)

RELAY LADDER Training Course (1 DVD)

Relay Training Part 1: You examine basic electrical components like the 3-phase disconnect and circuit breaker. They will also examine fuse classifications, overload heaters, control transformers, push button switches, relays and motors. You also learn about single phasing and reversing 3-phase motor rotation.

Relay Training Part 2: Training session 2 continues with electrical component operation. In part 2 they will learn about latch relays, lamps, limit, pressure, flow, thermal, foot, proximity, float, key, rotary, multi-stage, push-to-test and maintained push button switches. Also covered in part 2 are timers, timer contacts, solenoids, potentiometers, diodes, rectifier operation, SCR's, triacs and more.

Relay Training Part 3: During the third training session you will examine cable connectors and terminal strips. After completing basic component operation, the program provides an introduction to relay circuit operation.

Part 3 concludes with common Safety procedures which should be followed by all employees when working on any electrical system.

Relay Training Part 4: The fourth session provides an in depth understanding of relay circuit operation. They will learn control fundamentals. The students will learn the difference between control devices and output devices. They will learn about relay ladder sequencing and how to wire control transformers for both high and low 3-phase voltage potentials. At the end of their fourth training session, You will be able to read and understand relay ladder diagrams.

Relay Training Part 5: The final training session contains useful troubleshooting tips and techniques. Problems such as locating broken wires, locating shorted components, how to find the cause of intermittent failures and how to locate the cause of a blown fuse and many other common electrical problems are all covered in part 5.

Value $199.00

-PanelBuilder32 Training Course
Learn how to:
-Preparing a PanelView Terminal for Operation
-Creating an Application Using PanelBuilder32 Software
-Defining Network Communication Parameters for
a PanelBuilder32 Application
-Creating a Tag Database for a PanelBuilder32 Application
-Downloading an Application to a PanelView Terminal

- 2005 National Electrical Code (4 DVD)

Overcome your fear of the thick National Electrical
Code with its hundreds of rules and regulations.
There's no way you can memorize everything in the NEC.
But if you understand why and what is intended, you
will be better prepared to remember what you need
to use in your daily work when referring to the code.

Mastering these DVD's will help electricians, designers,
supervisors, contractors and maintainers understand
the NEC. The DVD's can be used to train and retrain
electrical staff.

The DVD's run from 75 to 90 minutes each and are
packed with updated information that effects your
daily work. You will used these DVD's for years to
come and beyond,so these DVD's bring you electrical
knowledge that will be good for years to come.

-Basic Electrical DC Calculations
-Basic Electrical AC Calculations
-NEC Residential Wiring Code
-NEC Residential Service Calculations

Basic Pneumatic CD Training Course-

Comes complete with approx 8 hours of basic hydraulics instruction. A interactive CD-ROM which includes Interactive Labs, 3-D simulations, quizzes and tests Pneumatics Contents:

Basic Physics- Build your foundation for the course by understanding the basic physics principles that govern pneumatics—energy, work, power,horsepower, heat, torque, flow, and pressure—as well as laws such as Boyle’s and Charles’ Gas Laws Compressors- Learn the terminology associated with compressors, see how compressors operate, and become familiar with the components that ensure safe and efficient operation of systems
Air Dryers- Discover the various ways air is dried to help preserve the metal parts exposed to air pressure
Air Preparation- Understand the steps of final preparation associated with filtering, regulating, and lubricating air before use in hydraulic systems, and when these techniques are necessary.
Air Distribution- Study the various points of air consumption, the pipe networks and how distribution is used to eliminate many potential problems Directional Control Valves- See the designs, operation techniques, port layouts, positions, and pressure configurations that help make pneumatic systems operate
Actuators- Learn the interface components that convert pneumatic energy into mechanical energy and the motions used by actuators in pneumatic systems
Miscellaneous Valves- Examine how various valves operation and learn their application within pneumatic systems—check, shuttle, pulse, quick exhaust, to name a few Accessories- Get an overview of several accessory components used in pneumatic circuits—pressure gauges, flow meters,mufflers, air nozzles, and more Airline Conductors- Learn the types of airline conductors and how they are best used to carry air to all the various components in the pneumatic circuit
Vacuum- See demonstrations on how vacuum is created to help your system work Understanding Schematics- Identify the different basic symbols of a pneumatic schematic and learn to read the layout of a basic pneumatic system on paper or computer
Value $199.00

- MOTOR CONTROL TRAINING COURSE (6 DVD)

Introduction to Motor Control Operations and Protection

Whether you're using AC or DC motors, this course will
give everyone in your plant the skills to protect your
equipment. This program, with (Sizing the Protection of
Motors and Control Circuits),provides the best reference
for safe motor operation in your plant.

AC Motor Controls and Troubleshooting

You need to know the basics when it comes to AC motor
controls and this program explains just that. More
importantly, it shows you how to quickly identify the
root cause of a problem in an AC motor.

We show you how to check the windings for open conditions,
isolate a problem to either the circuit or the motor, and
much more. We even cover the telltale symptoms of premature
motor failure.

DC motor controls and troubleshooting.

-Cut AC Motor Troubleshooting Time in Half
-Troubleshoot solid-state starters by quickly detecting
misfirings of SCRs
-Learn to identify the hidden problems that can cause
your motor to fail
-Troubleshoot across-the-line start motors as well as the
five types of reduced-voltage start motors
-Solve the trickiest reduced-voltage start problem Understand
how variable speed drives work and where to look to solve
problems
-Quickly troubleshoot multispeed motors and their circuits
learn how to double check the connections
-Troubleshoot the different reversing methods and circuits
used with AC motors
-Troubleshoot and Avoid DC Motor Failure
-Keep the production line running—learn to troubleshoot and control the speed of DC motors
-Avoid the most common mistakes made during the installation
and maintenance of brushes
-Learn how to detect an SCR fault in the power bridge of a
DC drive
-See how noise can affect the operation of a DC drive and
learn how to correct it
-Troubleshoot both the circuits and components used in the
three most common methods of decelerating a DC motor
-Bring full-voltage and reduced-voltage DC motors back
on-line fast

Value $480.00

- Everything is very simple to understand and will serve
as a resource in learning the Ins & Outs of Industrial Electrical systems.

No Prerequisite Needed, this is a entry-level course.

Don't let this course go --Buy NOW!!!

Shipping: Please add $20.95 for shipping and handling with tracking.

Item will ship immediately upon receipt of payment.

Return Policy

As a EBAY SELLER, I know that only Seller's With good customer satisfaction can survive.
Please contact me within 24 hours after the auction and payment must be received within 3 days. All damaged or defective items must be returned within 7 days for replacement only. If you do not agree with these terms, please do not bid!

This is an Auction - All Sales are Final unless they are found to be damaged or defective. We must be notified of the situation within 3 days of your receipt. DVD"s Must be returned within 3 days of date on receipt for Full Refund.All Returned Products found to be non-defective upon inspection will be subject to a 25% service fee + return shipping charge. Purchaser is responsible for all shipping costs incurred. Under NO circumstances will any shipping and processing fees be refunded. We reserve the right to cancel bids by users with recent or excessive negative feedback. Please bid only if you are serious about completing this transaction. Copyable items are not returnable - Items will be replaced only - No Cash refunds - NO EXCEPTIONS
Payment methods accepted - Payment: Paypal only with a confirmed address. I will not accept paypal payments without a confirmed address - NO EXCEPTIONS

Please note: These are MY PERSONAL COPIES, the Registration
cannot be Transfered or Registered. Courses are the FULL Professional versions and not DEMO’s. Shipping and handling fee is not refundable. Please contact me before returning any item ,otherwise I will refuse the
returned item and ship the item back to you.

My Feedback Policy

Please check my feedback on Ebay
under expert_tutor on this item.

Every day I review feedbacks given to me and I will return positive feedback immediately
to you.