Ford 302/328HP Turnkey Engine by Tuff Dawg Engines

If you are looking to upgrade that old, tired Ford 289 or Ford 302 and bolt in extra horsepower this Ford 302 crate engine by Tuff Dawg Engines would be an EXCELLENT choice with 328hp @ 5000rpm and 337ft lbs of torque @ 4000rpm. This engine has a semi-rough idle with enough cam to give it that muscle car sound but is still mild enough to be reliable for that everyday driver or restoration project. This engine works best with a mild 2200 stall speed converter if being used with an automatic transmission. This engine runs on leaded or unleaded premium pump fuel.

The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

• 3.000" stroke nodular iron crank
• 5.090" forged rods with ARP rod bolts
• 9 to 1 compression hypereutectic pistons

More special features of this engine include:

• Seasoned block that has been vatted, magnafluxed for cracks, thermal cleaned and steelabrated, bored, honed and plateau honed to fit new flat top oversized pistons
• Deck head gasket surface on block to ensure a good long lasting seal
• New CompCams Hydraulic flat tappet cam with .509"Int/512"Exh valve lift
• Heads have 3-angle valve job with bowls blended & hump in exhaust port removed for better flow
• New 1.940"Int/1.600"Exh swirl polished stainless valves with undercut stems to improve flow
• Both heads have been resurfaced to ensure a good long lasting seal
• New Hardened exhaust seats for use with leaded or unleaded fuel
• New High performance 1.440" springs set up to match cam
• New Valve seals
• New Valve guides
• New Screw-in rocker studs with guide plates
• New 1.6 roller tip rocker arms with balls and nuts
• New Oversize pistons and rings
• New Hardened push rods for use with guide plates
• New Heavy duty double row timing set
• New High volume oil pump
• New Revolutionary 1-pc design molded rubber oil pan gasket with load limiters to prevent over-tightening and higher temperature resistance than standard cork-rubber gaskets
• New Brass expansion plugs
• New Oversize main and rod bearings to fit reground 3.00" stroke crankshaft
• New Edelbrock Performer RPM dual plane aluminum intake manifold
• All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with oil pan, timing cover, harmonic balancer, valve covers, and Edelbrock Performer RPM dual plane aluminum intake manifold.

This engine has been started on gas and run. The camshaft has been broken in and the valves adjusted. Carburetor and timing has been initially set, but should be checked after installing in vehicle.

Also included and installed on engine:

• 570cfm Holley Street Avenger carb
• Fuel pump
• Chrome air cleaner
• Fuel filter
• Electronic distributor and coil
• Spark plugs and spark plug wires
• Water pump
• Crankshaft and water pump pulleys
• Alternator with bracket and alternator belt
• Starter
• Water outlet and thermostat
• Starter alignment plate for back of block
• A/T Flexplate with bolts
• This engine has been started on gas and run. Carburetor and timing has been initially set, but should be checked after installing in vehicle.

Not included on this engine:

Exhaust manifolds, hoses, fan, accessory belts (except alternator belt), radiator, linkage or miscellaneous.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.

Here at D&J MACHINE & PERFORMANCE ENGINES we have over 35 years experience in building top quality affordable, streetable, performance engines.

Purchase:

$4695.00. AZ residents add 8.3% tax. No core required!

Shipping:

FREE shipping to your home or business address that is accessible by a tractor trailer rig!

TERMS OF PAYMENT:

• Money orders or cashier checks
• Personal or company check (Takes 10 business days to clear bank before merchandise will be shipped)