CHEV 350/330HP TURNKEY
Hi Performance Balanced Crate Engine
Fits Miscellaneous Years
This Chevy 350 crate engine by Tuff Dawg Engines would be EXCELLENT for just about any street rod.
Would also be suitable for other applications (call or email us for
details). With 330HP @ 5000rpm and 390ft lbs
of torque @ 3500rpm it has good all around power, and works well with either
a manual or automatic transmission. This engine has enough cam to let you
know it has good all around power but not too big as to need to change to a
different stall speed convertor. This engine will run on leaded or unleaded pump
fuel.
The balanced rotating assembly (typically includes crankshaft,
pistons, rings, connecting rods, rod bearings, and balancer) featured in
this engine:
- 3.484" stroke nodular iron crank
- 5.7" forged rods with ARP rod bolts
- 9 to 1 compression flat top pistons
More special features of this engine include:
- Seasoned 4-bolt main block
- Deck head gasket surface on block to ensure a good seal
- New CompCams hydraulic flat tappet high performance cam
- 76cc heads with 1.940"Int/1.500"Exh valves
- New 1.250" high performance springs set up to match cam
- New High temperature valve seals
- New Spiral-type valve guides
- New Screw-in rocker studs with guide plates
- New Steel rocker arms with balls and nuts
- New Hardened push rods
- New Perfect Circle rings
- New Double row timing set
- New High volume oil pump with welded big pickup screen and
steel drive shaft and steel guide
- New Revolutionary 1-pc design molded rubber oil pan gasket with
load limiters to prevent over-tightening and higher temperature resistance
than standard cork-rubber gaskets
- New Brass expansion plugs
- New Edelbrock (non-egr) Dual Plane Performer aluminum intake
- All parts are painted separately before assembly for that show quality
look
This Is A Real Turnkey Engine
This engine has been started on gas and run. The camshaft has been broken in and the valves adjusted. Carburetor and timing has
been initially set, but should be checked after installing in vehicle.
Also included and installed on engine:
- New Chrome oil pan
- New Chrome timing cover with Chevrolet "bowtie" stamped in the middle
- New Chrome valve covers with "bowtie" stamp to match timing cover
- New Chrome air cleaner
- New Chrome dipstick and chrome tube
- New 670cfm Holley Street Avenger carburetor with electric choke. This is a Generation 4 carb with "No Trouble" power valve. This carb has a built in fuel filter
- New Mechanical fuel pump. Does not need external fuel regulator to control fuel as the regulator is built into the pump
- New Chrome dual feed fuel line
- New Fuel filter
- New PCV valve
- New MSD HEI distributor. This distributor has the centrifugal advance assembled with coated weights and welded weight pins (not pressed in like other models)
- New Accel 8mm suppression spark plug wires
- New Spark plugs
- New Water pump with long nose
- New Chrome water pump pulley
- New Chrome crankshaft pulley
- New Chrome 1-wire alternator
- New Chrome alternator brackets
- New Water outlet
- New Thermostat
- New High torque starter
- New 168 tooth flexplate for A/T
Not included on this engine:
Exhaust manifolds, hoses, fan, accessory belts (except alternator belt),
radiator, linkage or miscellaneous.
This engine is custom built from start to finish in our
state of the art facility by professionals that take pride in their
work to guarantee that you get a top quality engine the first time!.
$3995.00. AZ residents add 8.3% tax. No core required!
