Protek 3201 RF Field Analyzer 2GHz

Used Protek 3201 2GHz Field Strength Analyzer used very little, in very good condition. Comes with leather carrying case, computer cable, AC adapter and operational manuals.

100 KHz to 2060 MHz measurement range
Built in 2GHz frequency counter
Measures Wide band and Narrow band FM, AM and Single sideband signals
RS-232 interface
Back lit Display
Audio output
Antenna included
Up to 160 channels may be displayed
Stores setups and displays data in memory
Includes software and RS-232 Cable
Printer output

Specifications

Frequency
Frequency Range: 100 kHz to 2060 MHz
Frequency Step: 5KHz to 9995 kHz
Ref. Oscillator Accuracy: ± 3 PPM
Frequency Meas.: Narrow Band FM, Wide Band FM, AM and Single side band modulated signals

Input
Input Impedance: 50ohms,
Max. Input Volts: 5V rms.
Measurement units: dBmV, dBmV, Dbm
Attenuation: 0dB or –10dB internal.

Level Measurements
Narrow Band FM: Level Meas. Range: -118dBm to -68dBm (1MHz to 2060 MHz)
Resolution: ± 0.5dB
Accuracy: ± 3dB
Bandwidth: 12.5KHz
Wide band
FM, AM
and SSB: Level Meas. range: -108dBm to -67dBm (10 MHz to 2060 MHz)
Resolution: ± 0.5dB
Accuracy: ±3dB
Bandwidth: Wide band FM: Approx. 180 kHz
Bandwidth: AM and SSB: Approx. 2.4KHz
BFO Freq. Range: ± 1.5 KHz

Display
Display Modes: Spectrum, Bar graph and Frequency counter
Sweep Modes: Single, Normal and Free run

Scan Modes
Manual, Channel (memory scan) and Search scan

Memory
Data Mem: Stores 10 displays.
Setup Mem: Stores 10 setups for each scan mode.

Frequency Counter
Bandwidth: 9MHz to 2060MHz
Resolution: 1KHz
Accuracy: 50PPM ± 1 count
Input Impedance: 50ohms
Max input Volts: 5V rms.
Max. sensitivity: 50mV
Data Memories: Stores 10 readings

Miscellaneous
Interfaces: RS-232 and Parallel port
Power: 6 AA NiCad Batteries, 12 volt car adapter
11V to 16V 400 mA Max. AC to DC adapter
Dimensions: 9"H x 4"W x 1.77"D
Weight: 1.4 lb